印度Gurvinder P.Singh下订了一台五金铸件隧道式烘干炉

Device name

Quartz heating tunnel furnace

Size

Dimensions

L4100mm*W1210mm*H1400mm；Feed zone 800mm、Discharge opening area 300mm

Size oven

L3000mm*W1000mm*H400mm*High feed inlet200mm（Divided into two parts, upper and lower）

Structure and configuration

The overall structure

1、 gallbladder uses 1.00mm gold-plated mirror surface board manufacturing.Outside the gall bladder adopts 1.00mm cold plate, surface paint handling

2、 Silicate cotton thermal to use holding section of the heat insulation layer 90mm

3、Overall divided into two parts on the stove feed section working face 1000mm, 750mm high unloading Faces。

Electric apparatus

High temperature quartz heating tube heating, evenly distributed in the furnace body;

Fever furnace cover divided into two parts, both independently and independent temperature control transports the wind.

Thermocouple mounted platoon

To upper of rear of position thermocouples installed in furnace body。

Control System

Independent electrical control box, placed on above furnace body, (RKC intelligent digital display temperature controller is adjustable, 30A current meter, 500V voltmeter, insurance, heating paragraph through protection, power switch, indicator, control box heat dissipation air blower and so) three sets .

Transmission equipped

Power to use a motor is equipped 1: 180 speed reducer, a power frequency control Ed.
Mobility belt use of stainless steel mesh belt transmission products altogether 2 mesh beltrespectively length of 4 m and 5 m.

Technical indicators oven

And temperatures are degrees

RT~200℃≤±5℃%

Adjust the way

Balanced temperature. Control system according to the temperature set-point temperature controller control output heating wire thermocouple sensor, to achieve dynamic balance.

Precautions

During specialist needed job and look after may not be placed beside this equipment contain flammable or explosive or generated volatile, corrosive gases goods tested or stored, machine work